Integrate CO Detectors Into Your Home’s Security
Installing CO detectors in your home is a great start, but you are able to boost your safety even more by including them into your home security system. This supplies an added safeguard, as your monitoring agents will be updated whenever a CO detector is tripped. This support can be invaluable, particularly if a disaster takes place in the early morning hours and you don’t hear the alarm.
Get CO Detectors In Allentown With Your Home Security System
Protect your family against all kinds of risks with a full-featured home security system from Secure24 Alarm Systems. Our CO and smoke detectors in Allentown are monitored in the same fashion as your other security devices. You’ll get backup from a dedicated, round-the-clock team any time an emergency occurs. Dial (601) 298-3167 today to improve the protection of your family and home.
Where To Place Carbon Monoxide Detectors In Your Allentown Residence
Homeowners must defend against numerous risks like fire, burglary, and flooding. But what about a risk that you can’t smell or see? Carbon monoxide is different from other threats because you might never realize it’s there. Nevertheless, installing CO detectors can easily protect yourself and your household. Find out more about this hazardous gas and where to place carbon monoxide detectors in your Allentown property.
What Is Carbon Monoxide?
Known as the silent killer because of its absence of color, odor, or taste, carbon monoxide is a common gas produced by the incomplete combustion of fuels. Any appliance that utilizes fuels like an oven or furnace can produce carbon monoxide. While you normally won’t have problems, difficulties can arise when equipment is not frequently maintained or adequately vented. These missteps could lead to a build-up of this dangerous gas in your interior. Generators and heating appliances are the most frequent reasons for CO poisoning.
When exposed to minute amounts of CO, you might experience fatigue, headaches, dizziness nausea, or vomiting. Continuous exposure to higher amounts may lead to cardiorespiratory arrest, and even death.
Recommendations On Where To Place Allentown Carbon Monoxide Detectors
If you don’t have at least one carbon monoxide detector in your residence, purchase one today. If possible, you should use one on every floor, including basements. Explore these recommendations on where to place carbon monoxide detectors in Allentown:
- Put them on each level, especially where you use fuel-burning appliances, such as furnaces, water heaters, fireplaces, and gas dryers.
- Always install one within 10 feet of sleeping areas. If you only install one carbon monoxide detector, this is where it should go.
- install them at least 10 to 20 feet from potential CO sources.
- Do not affix them right next to or above fuel-utilizing appliances, as a non-hazardous amount of carbon monoxide might be released when they kick on and prompt a false alarm.
- Fasten them to walls approximately five feet off the ground so they may test air where people are breathing it.
- Avoid using them in dead-air areas and next to doors or windows.
- Put one in spaces above garages.
Test your CO detectors regularly and maintain them according to manufacturer guidelines. You will usually have to replace them every five to six years. You should also make certain any fuel-utilizing appliances are in in good working condition and have appropriate ventilation.